Sunday, May 25, 2014

Permit to Work

It is duty of all persons who may be concerned with control, and preparation and carrying out of work or testing on or adjacent to electro-mechanical system.

The policy of Permit To Work is to prevent all accident, injury or damage to health.

The Philosphy is the systems (power station)are design to be operated without danger in their normal operating mode, because of their electrical and mechanical characteristic content inherent danger so when work or test has to be carried out affecting the system and it is necessary ta change from normal operating mode, specify rule should be apply.

The principle is work or test will be carried out by limiting work area. If limiting work area is not sufficient, isolated should be apply if work at confined space and special procedure should be apply.

Adopted to Powergen Safety Rule.


4 comments:

  1. If you want to grow your familiarity just keep visiting this web site and be updated with the most recent information posted here.


    Here is my webpage ... how much should i weigh for my height and age

    ReplyDelete
  2. I pay a quick visit day-to-day a few web sites and information sites to read posts,
    but this webpage presents quality based writing.


    my page; best diet

    ReplyDelete
  3. Wow that was odd. I just wrote an very long comment but after I clicked submit my comment didn't show up. Grrrr... well I'm not writing all that over again.
    Anyways, just wanted to say superb blog!

    My weblog ... how much should i weigh pregnant

    ReplyDelete
  4. By adhering to these principles, power plant operators can ensure the safe execution of maintenance and testing activities, even when the system is not in its normal operating mode. Good luck! boat rental abu dhabi

    ReplyDelete